Whether you are operating in the upstream, midstream, or downstream part of the oil & gas industry, you know that pressure from Governments and environmental organisations have forced environmental issues centre-stage, while traditional safety and reliability issues are even more acute as the industry is fuelled by strong demand.
We can help you from the design of your new facilities (CAPEX), in deep water, offshore or onshore to the maintenance and operation of existing ones (OPEX): our scope of services, going far beyond traditional conformity assessment, encompasses also asset integrity management-related services, training and consulting on Oil & Gas and LNG markets.
Typical services include (but are not limited to)
1. Process Hazard Analyses, such as:
- Preliminary Hazard Analysis
- HAZID Workshops
- Hazard and Operability (HAZOP) Study
- Concept Selection and Layout Workshops
2. Risk Management
- ALARP Studies
- Simultaneous Operations (SIMOPS)
- Safety Management Systems
- Emergency Planning
- HSE Management
- HSE Management - Regulatory Assistance
- Bridging Documents
- Interface Plans
- Construction, operation and abandonment consents
- Risk Registers
3. Risk Analysis and Assessments
- Quantitative Risk Assessment (QRA)
- Consequence Analysis
- Frequency Analysis
- Dropped object modelling
- Fire and explosion analysis
- Marine and Transport Risk Assessment
4. Safety Critical Elements and Performance Standards
- Safety Critical Element Assessments (SCE)
- Performance Standards
- Bowtie Diagrams
- Written Schemes
- Safety Integrity Level Assessments
Deepwater, Offshore and Onshore: In these 3 domains, we deliver Conformity Assessment, Certification, Consulting & Training services helping our clients to create added economic value through risk management and performance optimisation.
|
Deepwater Facilities
> Floating units (FPSO, Semi-Sub…) and TLP/SPAR
> Offloading Facilities including Export Lines and Buoys
> Mooring Systems
> Rigid or Flexible Flowlines, Risers and Towers
> Pipelines and Subsea Equipment |
|
Technical Services and Expertise
Conformity Assessment
- Classification, Certification and Verification services.
- Independent Review of Major Systems.
- Technical Analysis using Veristar Offshore software modules covering hydrodynamics (HydroStar), mooring system (Ariane 3-D), strength, corrosion and fatigue (Veristar Hull and NSO BV ).
- Independent Studies on Pipelines or Risers using software such as Flexcom-3D, SAGE Profile or OFFPIPE.
- Type Approval and Certification of conformity of Bonded or Non-Bonded Flexible Pipes.
- Verification and Certification of Deepwater Systems such as risers and pipelines.
|
|
Asset Integrity Management
- Veristar RBI Software developed for Risk Based Inspection applied to Hull .
- Risk Based Inspection studies on FPSO Topsides using FAME+ software to develop optimised inspection plans.
- Safety Integrity Level assessment studies in particular for High Integrity Protection Systems (HIPS).
General Oil & Gas Services
Third Party Inspection
- In-Service Statutory or Voluntary Inspection of any type of system/equipment.
- Consistent and high quality worldwide Shop and Site Inspection with the possibility of using the web-based Extranet tool BVNet .
Product Conformity Assessment
- Conformity Assessment of Equipment or Complete System against European Directives (CE marking) or any other applicable standards (ASME). This involves independent Design Review combined with Shop and Site Inspection.
|
System Certification
- Management System Certifications such as Quality Management System Certification (ISO 9001), Environment Management System Certification (ISO 14001), Safety Management System Certification (OHSAS 18001).
- Personnel Certification in all disciplines such as Electrical Personnel, Welders and Lifting Operators.
Training
- Technical Training in Safety and Specific Risk Management.
- Training in Integrated HSE Management Systems .
Outsourcing
- Inspection Management, Quality Management, Expediting and Vendors Evaluation Services.
|
|
Tests and Measurements
- Performance of the full range of Non Destructive Testing services in selected countries.
Consulting QHSE
- Development of Standards.
- Supplier Independent Audit.
- Safety Management System benchmarking with VeriSAFE in-house tool.
- Environmental Impact Assessment.
Deepwater, Offshore and Onshore: In these 3 domains, we deliver Conformity Assessment, Certification, Consulting & Training services helping our clients to create added economic value through risk management and performance optimisation.
 |
Offshore Facilities
> Fixed Offshore Platforms and Floating Units
> Rigid or Flexible Risers and Flowlines
> Pipelines and Subsea Systems
> Concrete Gravity Base Structures
> Offshore LNG Plants, Export or Receiving Terminals |
Technical Services and Expertise
Conformity Assessment
- Design Review or Certification of Offshore Systems.
- Overall Project Certification covering Engineering, Procurement, Construction, Commissioning and Start-Up of the Project.
- Independent Analysis of offshore structures using NSO BV software.
- Pushover Analysis or Life Extension of offshore structures using in particular SACS Software.
- Type Approval and Project Certification of Bonded or Non-Bonded Flexible Pipes.
- Verification and Certification of Risers and Flowlines.
- Fitness-For-Service studies versus applicable standards of new, damaged or repaired systems.
Asset Integrity Management
General Oil & Gas Services
Third Party Inspection
- In-Service Statutory or Voluntary Inspection of any type of system/equipment.
- Consistent and high quality worldwide Shop and Site Inspection with the possibility of using the web-based Extranet tool BVNet .
Product Conformity Assessment
- Conformity Assessment of Equipment or Complete System against European Directives (CE marking) or any other applicable standards (ASME). This involves independent Design Review combined with Shop and Site Inspection.
System Certification
- Management System Certifications such as Quality Management System Certification (ISO 9001), Environment Management System Certification (ISO 14001), Safety Management System Certification (OHSAS 18001).
- Personnel Certification in all disciplines such as Electrical Personnel, Welders and Lifting Operators.
Training
- Technical Training in Safety and Specific Risk Management.
- Training in Integrated HSE Management Systems .
Outsourcing
- Inspection Management, Quality Management, Expediting and Vendors Evaluation Services.
Tests and Measurements
- Performance of the full range of Non Destructive Testing services in selected countries.
Consulting QHSE
- Development of Standards.
- Supplier Independent Audit.
- Safety Management System benchmarking with VeriSAFE in-house tool. Environmental Impact Assessment.
Deepwater, Offshore and Onshore: In these 3 domains, we deliver Conformity Assessment, Certification, Consulting & Training services helping our clients to create added economic value through risk management and performance optimisation.
 |
Onshore Facilities
> Onshore Oil & Gas Production Plants including Storage Facilities
> Gas Treatment Plants
> LNG Export or Receiving Facilities
> Refineries
> Onshore Oil & Gas Pipelines Systems
> Petrochemical Complexes
> Distribution Infrastructures |
Technical Services and Expertise
Conformity Assessment
- Independent Review of all Major Systems in particular process safety, mechanical equipment, pressurised equipment, lifting appliances, safety systems.
- Overall Project Certification covering all phases of a Project namely Engineering, Procurement, Construction, Commissioning and Start-Up.
- Corrosion and Materials Expertise and Review.
- Fitness-For-Service studies using ABAQUS software or other specialised software
Asset Integrity Management
- Risk Based Inspection using RB.eye software for Refineries and Petrochemical Complexes.
- Safety & Risk Management studies covering services such as HAZID, HAZOP and Quantitative Risk Assessment (QRA).
- Safety Integrity Level (SIL) assessment studies for Safety Instrumented Systems.
- Process System Integrity studies to address vibration induced fatigue in process piping.
- Maintenance management optimisation based on reliability studies.
General Oil & Gas Services
Third Party Inspection
- In-Service Statutory or Voluntary Inspection of any type of system/equipment.
- Consistent and high quality worldwide Shop and Site Inspection with the possibility of using the web-based Extranet tool BVNet .
Product Conformity Assessment
- Conformity Assessment of Equipment or Complete System against European Directives (CE marking) or any other applicable standards (ASME). This involves independent Design Review combined with Shop and Site Inspection.
System Certification
- Management System Certifications such as Quality Management System Certification (ISO 9001), Environment Management System Certification (ISO 14001), Safety Management System Certification (OHSAS 18001).
- Personnel Certification in all disciplines such as Electrical Personnel, Welders and Lifting Operators.
Training
- Technical Training in Safety and Specific Risk Management.
- Training in Integrated HSE Management Systems .
Outsourcing
- Inspection Management, Quality Management, Expediting and Vendors Evaluation Services.
Tests and Measurements
- Performance of the full range of Non Destructive Testing services in selected countries.
Consulting QHSE
- Development of Standards.
- Supplier Independent Audit.
- Safety Management System benchmarking with VeriSAFE in-house tool.
- Environmental Impact Assessment.
Send an e-mail